![]() |
Equipped with a flow sensor and a fall detection sensor, the LinkTap G2-S is the most fail-safe water timer on the market. It will alert you to unexpected problems such as irrigation pipe clogs/leaks, water cut-offs, valve failures, or device falls. It can even automatically shut off the water for you if the pipe leak is detected. | ![]() |
With 6 watering modes and up to 100 watering cycles per day from 3 seconds to 24 hours per cycle, the LinkTap system offers the most comprehensive watering options to meet any needs. |
![]() |
Setup is as easy as scanning the device's QR code from the app. With just one scan, the devices will automatically connect to each other in seconds. | ![]() |
Uses Zigbee technology instead of Wi-Fi or Bluetooth to provide better wireless coverage while consuming very little battery power. |
![]() |
Equipped with a flow sensor and a fall detection sensor, the LinkTap G2-S is the most fail-safe water timer on the market. It will alert you to unexpected problems such as irrigation pipe clogs/leaks, water cut-offs, valve failures, or device falls. It can even automatically shut off the water for you if the pipe leak is detected. |
![]() |
With 6 watering modes and up to 100 watering cycles per day from 3 seconds to 24 hours per cycle, the LinkTap system offers the most comprehensive watering options to meet any needs. |
![]() |
Setup is as easy as scanning the device's QR code from the app. With just one scan, the devices will automatically connect to each other in seconds. |
![]() |
Uses Zigbee technology instead of Wi-Fi or Bluetooth to provide better wireless coverage while consuming very little battery power. |
|
|
|
|
||
|
||
|
![]() |
Main Features
# Actual ranges may vary depending on environmental conditions, building materials, etc.
† Actual flow rate is also dependent on the water pressure, pipe size, etc.
|
Real-Time Fault Detection and Notification
When a fault is detected, in addition to sending real-time push notification to your phone/tablet, the LinkTap system also sends an email to your registered email address and two other email addresses. You can enter the email address of your neighbors, friends, colleagues, etc. Should you be unable to respond to the fault immediately, your other assigned contacts will be alerted and can help handle it for you.
In case of pipe leaks, you can also choose to have system automatically shut off the water for you when an unusually high flow is detected.
|
![]() |
![]() |
Rain Skip Saves You Water and Time
Rain Skip checks local weather a few minutes before a watering cycle starts. If the predefined rainfall threshold is met using observed + forecasted rainfall (rainfall in the last 6/12/24/48/72 + future 6/12/24/48 hours), the watering cycle will be skipped.
The customisable Rain Skip function saves the average household thousands of liters of water as it can skip watering schedules BEFORE it rains. Traditional rain sensors only skip schedules AFTER it has rained, as it needs to physically "feel" rain. Best of all, Rain Skip is FREE!
|
Receive Push Notifications in Real Time
Real-time push notifications and/or emails will be sent to your phone / tablet when one of the following events occurs:
|
|
![]() |
Comprehensive Watering Options to Meet Various Needs
From immediate starts and stops to setting specific dates, times and duration for watering, each LinkTap water timer can be operated with 6 watering modes: Instant mode, Calendar mode, Odd-even mode, Month mode, Interval mode and 7-day mode. With the ability to allow up to 100 watering cycles per day from 3 seconds to 24 hours per cycle, the LinkTap system can meet almost any watering requirements.
In addition, the LinkTap system provides options for advanced watering control, such as one-click pause / resume, configurable batch watering, and multiple interval plans for shallow and deep watering.
|
View Watering Plans and Historical Data & Notifications
In addition to real time watering progress information, you can easily view watering plans for the next 30 days, push notifications of the past 14 days, and comprehensive historical watering data of the past 90 days with just one click on the app.
|
|
![]() SAME GATEWAY, SAME APP
|
Versatile Configuration
Up to 15 wireless water timers can be controlled via one gateway, and up to 15 gateways can be accessed through one user account.
The LinkTap G1-S and G2-S water timers work with both GW-01 and GW-02 Gateways. If you already have a LinkTap system and are thinking to expand it, you can just get the add-on G1-S or G2-S water timer.
|
Share Control of Your LinkTap Devices
As the owner of a LinkTap system, you can invite people (e.g., family members, neighbours or your gardener) to control your LinkTap devices, edit their permissions, and allow them to control your LinkTap system from anywhere — all with the LinkTap app.
As a landscape professional, you can easily manage and operate your clients' LinkTap systems from anywhere via the free LinkTap app on your phone, tablet or computer.
|
![]() |
G1-S | G2-S | |
![]() |
![]() |
|
Weather awareness | ||
2 times the range of Wi-Fi | ||
2 year battery life | ||
6 watering modes + ECO + batch watering | ||
2 minute easy setup | ||
Up to 100 watering cycles per day from 3 seconds to 24 hours per cycle duration | ||
IP66 waterproof | ||
Manual on/off button with digital lockout | ||
Real-time push notifications for watering starts & ends, Rain Skip, battery low and device offline events | ||
High flow rate (> 32 LPM) | ||
Voice control via Alexa and Google Assistant & Home | ||
Real-time flow rate and water usage notification | ||
Real-time device fall detection & notification | ||
Real-time valve failure detection & notification | ||
Real-time water cut-off detection & notification | ||
Real-time pipe leak / clog detection & notification |
![]() 2-Minute Setup
Setting up the LinkTap system is easy and straightforward with our step-by-step guide inside the box. Connect the gateway to your router, register the hardware in the app with a simple QR code, and you’re ready to go!
|
![]() Long-Distance Wireless Coverage
LinkTap products provide over 2 times the range of WiFi with reliable wireless communication between the gateway and water timer. The gateway is designed to function alongside the water timer with a range of up to 200m away in line-of-sight.
|
![]() A Range of Watering Options
The LinkTap app allows you to select a wide variety of watering modes, whether you aim to start watering every other day, every morning, on a specific date, or on any other specific schedule. All watering modes come with an ECO function. Watering duration ranges from 3 seconds to 23 hours 59 minutes 59 seconds, with the option of up to 100 watering cycles per day.
|
![]() Safety Focused Design
If a power and/or network outage occurs, any watering in progress will end as usual, and any subsequent watering will still take place as scheduled. Additionally, the manual on/off button comes with a digital lockout feature. This ensures that your G2S will never be inadvertently turned on or off.
|
![]() Rugged and Weatherproof
The solenoid valve can withstand high-pressure and ensure your water timer remains operational for years. Plus, the UV-safe exterior and waterproof design protects it from harsh weather conditions. Designed for every type of climate, the LinkTap water timers are robust, sturdy, and reliable.
|
![]() Use LinkTap in Your Smart Home
Have your hands full? LinkTap timers can be set or controlled remotely throughout your smart home by speaking with Alexa or Google Home. Just give the command, and LinkTap will take care of the rest.
|
![]() 2-Minute Setup
Setting up the LinkTap system is easy and straightforward with our step-by-step guide inside the box. Connect the gateway to your router, register the hardware in the app with a simple QR code, and you’re ready to go!
|
![]() Long-Distance Wireless Coverage
LinkTap products provide over 2 times the range of WiFi with reliable wireless communication between the gateway and water timer. The gateway is designed to function alongside the water timer with a range of up to 200m away in line-of-sight.
|
![]() A Range of Watering Options
The LinkTap app allows you to select a wide variety of watering modes, whether you aim to start watering every other day, every morning, on a specific date, or on any other specific schedule. All watering modes come with an ECO function. Watering duration ranges from 3 seconds to 23 hours 59 minutes 59 seconds, with the option of up to 100 watering cycles per day.
|
![]() Safety Focused Design
If a power and/or network outage occurs, any watering in progress will end as usual, and any subsequent watering will still take place as scheduled. Additionally, the manual on/off button comes with a digital lockout feature. This ensures that your G2S will never be inadvertently turned on or off.
|
![]() Rugged and Weatherproof
The solenoid valve can withstand high-pressure and ensure your water timer remains operational for years. Plus, the UV-safe exterior and waterproof design protects it from harsh weather conditions. Designed for every type of climate, the LinkTap water timers are robust, sturdy, and reliable.
|
![]() Use LinkTap in Your Smart Home
Have your hands full? LinkTap timers can be set or controlled remotely throughout your smart home by speaking with Alexa or Google Home. Just give the command, and LinkTap will take care of the rest.
|
Wireless Water Timer | Wireless Gateway | ||
TP-1N (G1), TP-2N (G2), TP-1NS (G1-S), TP-2NS (G2-S) |
TP-1B (G1), TP-2B (G2), TP-1BS (G1-S), TP-2BS (G2-S) |
GW-01 GW-02 |
GW-1C GW-2C |
GHT thread. Suitable for the USA and Canada. | BSP thread. Suitable for the EU, Australia and China. | Suitable for all countries except China | Suitable for China |
Wireless Water Timer | |
TP-1N (G1), TP-2N (G2) TP-1NS (G1-S), TP-2NS (G2-S) |
GHT thread. Suitable for the USA and Canada. |
TP-1B (G1), TP-2B (G2) TP-1BS (G1-S), TP-2BS (G2-S) |
BSP thread. Suitable for the EU, Australia and China. |
Wireless Gateway | |
GW-01 GW-02 |
Suitable for all countries except China |
GW-1C GW-2C |
Suitable for China |